Insulation screw IPS 80

Special screw for direct fastening into insulation materials (ETICS)

Product image of insulation screw IPS all colours

Product image of insulation screw IPS 80 anthracite grey

Product image of insulation screw IPS 80 copper brown

Product image of insulation screw IPS 80 chocolate brown

Product image of insulation screw IPS 80 sepia brown

Product image of insulation screw IPS 80 signal white

Product image of insulation screw IPS 80 telegrey

Product image of insulation screw IPS 80 traffic black

Product overview

Save time versus traditional fastening on insulated boards! Install up to 5 fixings with the time it would take to install only 1 using other fastening solutions.

The insulation screw IPS is perfectly suitable for direct fastening into insulation materials without thermal bridges of wall connection profiles, metal sheets, base protection profiles, cornice covers, motion detectors, lamps, signs, ... making the IPS the reference fixing for thermal insulation in light duty applicartions and light loads, that must be secured directly into the insulation.

The pre-assembled and weather resistant EPDM sealing ensures clean sealing against driving rain up to wind force 11 (violent storm), tested in accordance to DIN EN 1027 by the "Prüfzentrum für Bauelemente" (testing center for building elements) Pfb in Rosenheim, Germany. The sealing ring prevents water and cold from penetrating the façade and seals it permanently. No subsequent sealing is necessary, which saves you an installation step. The drill hole is automatically sealed rainproof and the energy efficiency of the insulated façade is maintained.

The innovative IPS is a screw made out of glass fiber-reinforced nylon, that means: aging, weather and UV-resistant. Its stylish flat head with EPDM sealing ensures optimal sealing and surface blending.

Built with the TX-Drive (TX25) to get a fast and easy installation.

The head hole allows light duty fixings in combination with a screw 3,5 mm. A distinctive thread ensures good hold in insulation boards, furthermore the IPS fits through a 8mm hole. No pre-drilling in plaster (up to 7 mm) due to sharp drilling rip, therefore you get an extremely fast mounting.

Conceived with a length of 80mm the IPS is suitable for nearly all insulated facades (from 80mm) such as external thermal insulation composite systems (ETICS), styrofoam boards, hard foam boards, polystyrene boards or wood firbre boards.

Find it available in different colours to match with the most common materials and finishing.

Made in Germany. Halogene free.

Download documents

View videos

List of references

Filters

Colour

Packaging type.

Reference

9180IPS

9GR80IPS

9480IPS

9CO80IPS

9AN80IPS

9M80IPS

9MO80IPS

5180IPSPH4

Screw diameter [mm]

3.5

Colour

RAL 9003 - Signal White

RAL 7045 - Telegrey

RAL 9017 - Traffic black

RAL 8004 - Copper brown

RAL 7016 - Anthracite grey

RAL 8014 - Sepia brown

RAL 8017 - Chocolate brown

RAL 9003 - Signal White

Plug length [mm]

Head diameter [mm]

Clearance hole [mm]

8-10

Screw insertion depth [mm]

Thickness of fixture [mm]

Packaging units

Packaging type.

Box

Blister

Applications

Signs
Lighting
Wall connection profiles
Base protection profiles
Cornice covers
Motion sensor/detector

Further specifications

Key features:

Direct fastening into external thermal insulation composite systems (ETICS) without thermal bridges
For fastening wall connection profiles, metal sheets, signs, etc. into insulation materials

No pre-drilling in plaster (≤ 7 mm) due to sharp drilling tip
Made with weather, age, and UV-resistant fiberglass reinforced nylon and EPDM rubber
Stylish flat head in different colors

Base materials

Suitable materials