Insulation screw IPSZ 80

Special insulation screw made of zinc die-cast for direct mounting in ETICS

Product overview

Extremely fast and without thermal bridges: The IPSZ 80 insulation screw made of die-cast zinc is your specialised insulation screw for direct fastening in external thermal insulation composite systems (ETICS) and enables fast and at the same time thermal bridge-free direct fastening of wall connection profiles, metal sheets, skirting protection strips, signs, etc. on insulated façades.

How to save time with IPSZ 80:
The IPSZ 80 insulation screw speeds up the mounting process and helps you save installation time, as the sharp drilling tip makes pre-drilling in plaster unnecessary when mounting to insulated façades. The insulation screw can also be screwed directly into AAC2 aerated concrete and also drills through the overlapping of thin sheet metal. At the same time, the TX25 drive ensures high torque transmission and extremely fast screwing. Due to the integrated sealing ring, no subsequent sealing is necessary, which also saves you an installation step.

Rain tight and free of thermal bridges:
The insulation screw is made of zinc and features a pre-assembled and weather-resistant EPDM sealing ring. This makes the IPSZ 80 insulation board screw both corrosion-resistant, as well as completely resistant to ageing, weathering and UV-rays. The sealing ring prevents the penetration of water and cold into the façade and seals it permanently. In this way, the IPSZ 80 insulation screw ensures fastening free of thermal bridges to the external insulation and maintains the energy efficiency of your building.

The screw can be optimally screwed into clearance holes with a diameter of 8 mm, as is common with wall profiles or cover strips. With a length of 80 mm, it can be used for almost all insulated facades from 80 mm. The distinctive threads provide a secure hold in ETICS, polystyrene boards, rigid foam boards and more.

Due to the head hole, the thermal screw IPSZ 80 is also well suited for light fixings with a Ø 3.5 mm screw.

List of references

Filters

Sort by

Column

Sort direction

Reference

980IPSZ

Diameter [mm]

Length [mm]

Plug length [mm]

Clearance hole [mm]

8-10

Head diameter [mm]

Recess type

TX25

Material

Zinc die casting

Packaging units

Packaging type.

Box

1 / 1 references are shown

Applications

Signs
Lighting
Wall connection profiles
Base protection profiles
Cornice covers
Motion detector
Metal sheets

Further specifications

Key features:

Special screw for direct fastening into external thermal insulation composite systems (ETICS) - extremely fast and without thermal bridges!
Can be screwed directly into aerated concrete AAC2
For fastening of wall connection profiles, metal sheets, base protection profiles, cornice covers, motion detectors, lamps, signs, etc. into the insulation material
No pre-drilling in plaster due to sharp drilling tip
Suitable for clearance holes ≥ Ø 8 mm (common for wall profiles)
Suitable for light duty fixings in combination with a screw Ø 3,5 mm
Corrosion-resistanz zinc die-casting