ResiTHERM® 16 + 12 for heavy-duty fixings on the insulated façade

ResiTHERM® 16 + 12 for heavy-duty fixings on the insulated façade

ResiTHERM® 16 makes the difference

Reliable, durable fastening with ETA (European Technical Assessment / Approval), pending

Effective thermal separation prevents cold bridges

Impervious to driving rain up to wind force 11 (violent storm)

Significant time and cost savings due to simple and quick installation

High-quality materials such as A4 stainless steel

Made in Germany
(Aichach, Bavaria)

Reliable, durable fastening with ETA (European Technical Assessment / Approval), pending

Effective thermal separation prevents cold bridges

Impervious to driving rain up to wind force 11 (violent storm)

Significant time and cost savings due to simple and quick installation

High-quality materials such as A4 stainless steel

Made in Germany
(Aichach, Bavaria)

One fastening solution, many advantages

Suitable for all common building materials:
such as concrete, aerated concrete, masonry (solid and perforated brick)

Thermal separation module:
The thermal separation module prevents heat bridges and features a special thread. This specially developed thread screws itself into the insulation material - you save time as no additional tools are required.

No thermal bridges:
Effective thermal separation prevents heat bridges and protects against mould and heat loss

High application flexibility:
ResiTHERM® 16 is suitable for all insulation types and thicknesses from 60-300 mm in concrete and 60-250 mm in perforated bricks

Driving rain and windproof fastening:
Pre-assembled and weather resistant EPDM sealing ensures clean sealing against driving rain up to wind force 11 (violent storm), tested according to DIN EN 12155, no subsequent work necessary such as sealing the fastening point

High-quality materials:
No risk of corrosion due to high-quality materials such as stainless steel A4 and the glass-fibre reinforced separation module

Readjustable anchor rods:
The screw-in depth of the M12 as well as the M16 threaded rod can be amended

Suitable for all common building materials:
such as concrete, aerated concrete, masonry (solid and perforated brick)

Thermal separation module:
The thermal separation module prevents heat bridges and features a special thread. This specially developed thread screws itself into the insulation material - you save time as no additional tools are required.

No thermal bridges:
Effective thermal separation prevents heat bridges and protects against mould and heat loss

High application flexibility:
ResiTHERM® 16 is suitable for all insulation types and thicknesses from 60-300 mm in concrete and 60-250 mm in perforated bricks

Driving rain and windproof fastening:
Pre-assembled and weather resistant EPDM sealing ensures clean sealing against driving rain up to wind force 11 (violent storm), tested according to DIN EN 12155, no subsequent work necessary such as sealing the fastening point

High-quality materials:
No risk of corrosion due to high-quality materials such as stainless steel A4 and the glass-fibre reinforced separation module

Readjustable anchor rods:
The screw-in depth of the M12 as well as the M16 threaded rod can be amended

Fast mounting with ResiTHERM® 16

Video ResiTHERM® 16 mounting in concrete

Video ResiTHERM® 16 mounting in hollow brick

This is how quick and easy the installation of the ResiTHERM® 16 distance mounting system works:

1. Drill a hole, drill hole depth varies depending on insulation thickness and substrate

2. Cut the ResiTHERM® 16 to length

3. Fill the drill hole with injection mortar (For perforated brick: use sieve sleeve)

4. Screw in the ResiTHERM® 16 until the seal is pressed against the plaster, the thermal separation module drills itself into the insulation

5. DONE!
Let the injection mortar cure and mount the fixture

Please refer to the assembly instructions for all details:

Video ResiTHERM® 16 mounting in concrete

Video ResiTHERM® 16 mounting in hollow brick

This is how quick and easy the installation of the ResiTHERM® 16 distance mounting system works:

1. Drill a hole, drill hole depth varies depending on insulation thickness and substrate

2. Cut the ResiTHERM® 16 to length

3. Fill the drill hole with injection mortar (For perforated brick: use sieve sleeve)

4. Screw in the ResiTHERM® 16 until the seal is pressed against the plaster, the thermal separation module drills itself into the insulation

5. DONE!
Let the injection mortar cure and mount the fixture

Please refer to the assembly instructions for all details:

Better safe than sorry - ResiTHERM® 16

If heavy loads such as canopies, awnings, French balconies, sun sails or air-conditioning units are to be fixed to the external insulation, fixing in the insulation material alone is not sufficient.

The challenge is to bridge the insulation material without causing a thermal bridge and to create a secure anchorage in the wall, e.g. in concrete or perforated brick. ResiTHERM® 16 meets and exceeds both of these requirements, as the innovative product is also quick and easy to install and, unlike conventional products, has an ETA (European Technical Assessment).

Typical applications of ResiTHERM® 16

As the applications mentioned are safety-relevant applications, the failure of which can pose a danger to people, ResiTHERM® 16 has undergone comprehensive testing according to the current state of the art and is the only product of its kind on the market that has an ETA. Fastening technology products with an ETA are not only recognised in all member states of the EU, but also beyond, often worldwide. Find out why you should use ETA approved products.

In our practical insulation fixings guide, you can find out which products we recommend for other applications such as lamps, letterboxes, cornice covers, wall connection profiles on carports, rainwater downpipes and much more. We explain which product is best suited depending on the insulation and load values:

As the applications mentioned are safety-relevant applications, the failure of which can pose a danger to people, ResiTHERM® 16 has undergone comprehensive testing according to the current state of the art and is the only product of its kind on the market that has an ETA. Fastening technology products with an ETA are not only recognised in all member states of the EU, but also beyond, often worldwide. Find out why you should use ETA approved fixings

In our practical insulation fixings guide, you can find out which products we recommend for other applications such as lamps, letterboxes, cornice covers, wall connection profiles on carports, rainwater downpipes and much more. We explain which product is best suited depending on the insulation and load values:

ResiTHERM® 16 & ResiTHERM® 12- content of sets & variants

NEW! ResiTHERM® 12 will be available soon

The new ResiTHERM 12 and ResiTHERM 16 in comparison

Like ResiTHERM® 16, ResiTHERM® 12 is ETA-approved, driving rain-proof according to DIN EN 1027 and quick to install. The two innovative products differ in the diameter of the threaded rod lying in the wall - M12 for ResiTHERM® 12 as opposed to the larger M16 threaded rod for ResiTHERM® 16.

Contact us to find out more or to pre-order the product:

Content
ResiTHERM® 16 is available in two easy-to-use sets of 2 or in a bulk pack of 20. A set of 2 contains:

  • 2x ResiTHERM® 16, thermal separation module M16 / M12
  • 2x Threaded rod M16, DIN 976, zinc plated, steel quality 8.8
  • 2x Threaded stud M12x70, DIN 913, stainless steel A4
  • 2x Hexagon nut M12, DIN 934, stainless steel A4
  • 2x Washer M12, DIN 125, stainless steel A4
  • 1x Hexagon socket bit, 1/4 Inch, size 6
  • 1x Mixing nozzle extension 245 mm
  • 2x Plastic sleeve SH 20x130 mm
  • 1x Instruction manual ResiTHERM® 16

For installation we recommend our injection mortar ResiFIX (see following section accessories)

ResiTHERM® 16 is available in two variants:
zinc plated or stainless steel
While the external metal parts are always made of A4 stainless steel, the two M16 threaded rods located in the insulation are different. These are available in zinc plated or A4 stainless steel.

Set-content in the packaging and outside

Content
ResiTHERM® 16 is available in two easy-to-use sets of 2 or in a bulk pack of 20. A set of 2 contains:

  • 2x ResiTHERM® 16, thermal separation module M16 / M12
  • 2x Threaded rod M16, DIN 976, zinc plated, steel quality 8.8
  • 2x Threaded stud M12x70, DIN 913, stainless steel A4
  • 2x Hexagon nut M12, DIN 934, stainless steel A4
  • 2x Washer M12, DIN 125, stainless steel A4
  • 1x Hexagon socket bit, 1/4 Inch, size 6
  • 1x Mixing nozzle extension 245 mm
  • 2x Plastic sleeve SH 20x130 mm
  • 1x Instruction manual ResiTHERM® 16

For installation we recommend our injection mortar ResiFIX (see following section accessories)

ResiTHERM® 16 is available in two variants:
zinc plated or stainless steel
While the external metal parts are always made of A4 stainless steel, the two M16 threaded rods located in the insulation are different. These are available in zinc plated or A4 stainless steel.

Extensive accessories

Two-hole nut driver, DIN 3116C for adjusting ResiTHERM® 16

Threaded stud adapter M12/M10, stainless steel A4 incl. nut M10 and washer

Injection mortar ResiFIX Vinylester VYSF (styrene free)

Injection mortar ResiFIX Vinylester VY ECO SF (styrene free)

Injection mortar ResiFIX Polyester PYSF (styrene free)

Two-hole nut driver, DIN 3116C for adjusting ResiTHERM® 16

Threaded stud adapter M12/M10, stainless steel A4 incl. nut M10 and washer

Injection mortar ResiFIX Vinylester VYSF (styrene free)

Injection mortar ResiFIX Vinylester VY ECO SF (styrene free)

Injection mortar ResiFIX Polyester PYSF (styrene free)

Avoid thermal bridges and save heating costs?

When heat is lost from the building envelope at specific points, these are known as thermal bridges, cold bridges or heat bridges. These heat losses can occur when, among other things, awnings, letterboxes, house numbers, etc. are retrofitted to the exterior insulation as they interrupt the insulation at the attachment point and allow cold to penetrate.

Cold bridges can have a negative impact on your wallet, your health and even the building substance. Find out why you should avoid thermal bridges - or ensure thermal separation - and how the right fastening solutions can help you save on heating costs and keep the energy efficiency of your building.

CELO is your specialist for insulation fixings

Years of experience in the development, manufacture and distribution of technical fastening solutions

Different fastening solutions for insulated façades, for light and heavy loads

Countries worldwide where we successfully supply our products

Professional employees working to assist you with outstanding products and service

Years of experience in the development, manufacture and distribution of technical fastening solutions

Different fastening solutions for insulated façades, for light and heavy loads

Countries worldwide where we successfully supply our products

Professional employees working to assist you with outstanding products and service

Do you have questions around thermally separated stand-off installations in ETICS (External Insulation Composite Systems)?
Our competent technical consulting team will provide you with comprehensive advice on questions relating to your application.
Contact us by phone or here via our contact form.