Drop-in anchor SA plus

The approved anchor for ceiling installations

Product overview

The classic drop-in anchor SA plus is suitable for various applications in ceilings and mainstream construction. Inline with the European Technical Assessment the SA plus is an excellent all-round anchor that enables secure installation close to the edges.

Good labeling on the anchor of the type and diameter, will help to ensure the correct ones are used on the project. The perfect configuration of the cone and the sleeve ensures simple hammering-in at high load values and the rounded sleeve simplifies the mounting.

For correct installation a setting tool is needed: Use the ESW or ESW pro with hand protection.

All our references sizing M10 or smaller are certified with an European Technical Assessment (ETA) for both non-cracked concrete and cracked concrete, where as all references sizing M12 and above are certified for non-cracked concrete only. Refer to the table below to choose the right one for your application.

Download documents

List of references

Filters

Drill hole diameter [mm]

Drill hole depth [mm]

Eff. Anchorage depth [mm]

Anchor length [mm]

Insertion depth [mm]

Reference

96SAP

98SAP

910SAP

912SAP

916SAP

920SAP

Diameter [mm]

Length [mm]

Drill hole diameter [mm]

Drill hole depth [mm]

Eff. Anchorage depth [mm]

Anchor length [mm]

Insertion depth [mm]

6-11

8-13

10-16

12-23

16-32

22-35

Packaging units

100

Packaging type.

Box

6 / 6 references

Applications

General ceiling installations
Pipelines
Sprinkler systems
Cable trays
Consoles
Shuttering props

Further specifications

Key features:

The drop-in anchor SA plus is approved for multiple use for non-structural applications in cracked concrete
The high expansion ability of the drop-in anchor anables a small drill hole and low anchorage depth
The setting tool ESW Pro or ESW is necessary for the correct installation