Drop-in anchor SAK plus with collar

The approved anchor for ceiling installations

Product image of drop-in anchor SA plus with collar

The technical drawing shows you how and where the features of the product can be measured or read.

Product overview

The classic drop-in anchor, SAK plus with collar, is suitable for various applications in ceilings and mainstream construction. Inline with the European Technical Assessment (ETA) the SA plus is an excellent all-round anchor, that enables secure installation close to the edges.

The perfect configuration of the cone and the sleeve ensures simple hammering-in at high load values. The anchor collar prevents slippage into the drill hole and the rounded sleeve simplifies the mounting. Good labeling on the anchor of the type and diameter, will help to ensure the correct ones are used on the project.

For installation a setting tool is needed: Use the ESW or ESW pro with hand protection.

All our sizing references M10 or smaller are certified with an European Technical Assessment (ETA) for both non-cracked concrete and cracked concrete, where as all sizing references M12 and above are certified for non-cracked concrete only. Refer to the table below to choose the right one for your application.

The short anchors, SAK plus 8-25 and SAK plus 10-25, with a length of 25 mm are perfectly suitable for precast, prestressed hollow core slabs.

Download documents

List of references

Filters

Reference

Drill hole diameter [mm]

Drill hole depth [mm]

Eff. Anchorage depth [mm]

Plug length [mm]

Insertion depth [mm]

Packaging units

Sort by

Column

Sort direction

Reference

96SAPK

9825SAPK

98SAPK

91025SAPK

910SAPK

912SAPK

916SAPK

6SAPK

8SAPK

10SAPK

Screw diameter [mm]

Drill hole diameter [mm]

Drill hole depth [mm]

Eff. Anchorage depth [mm]

Plug length [mm]

Insertion depth [mm]

6-11

6-12

8-13

8-12

10-16

12-23

16-32

6-11

8-13

10-16

Type of plug

with collar

Packaging units

100

Packaging type.

Box

10 / 10 references are shown

Applications

General ceiling installations
Pipelines
Sprinkler systems
Cable trays
Consoles
Shuttering props

Further specifications

Key features:

Approved for single use in non-cracked concrete and for multiple use for non-structural applications in cracked concrete
Lip prevents slipping into the drill hole
The high expansion ability of the drop-in anchor anables a small drill hole and low anchorage depth
The setting tool ESW Pro or ESW is necessary for the correct installation

Base materials:

Concrete

Do you have any questions about this product?

Request more info