Blister Insulation plug IPL

Special plug for all light fastenings in ETICS

Product image of blister insulation plug IPL with screw

Product image of insulation screw IPL 95

Product overview

With the insulation plug IPL in the handy blister direct fastening into external insulation material is possible - without thermal bridge. It is therefore a perfect solution for fixing in thermal insulation composite systems, hard-foam boards, polystyrene boards and many other substrates. The IPL consists of ageing- and weather-resistant nylon, is temperature-resistant from -40 to +80 °C and, thanks to its sharp cutting tip, drills reliably through hard ETICS plaster (up to 7 mm) - without pre-drilling.

The IPL 60 with a head Ø 25 mm is ideal for light fixings such as small lamps, motion detectors and edge trim strips, which are fixed to the anchor with a chipboard screw Ø 4.5- 5.0 mm. Make the installation of the IPL 60 easier with the practical duo bit: no bit change is necessary during installation and the duo bit is available in three versions (TX20/TX40, TX25/TX40 and PZ2/TX40). This saves time and money.

The larger IPL 95 with head Ø 32 mm is ideal for larger lamps and letterboxes, but is also suitable for fixing rainwater downpipes. A metric screw M8 x 30 is included as setting tool for the SW13 drive of the plug.

The IPL 60 blister with or without screw includes 4 plugs for your individual projects and the IPL 95 blister icludes 2 plugs along with a screw M8 as setting tool.

Download documents

List of references

Filters

Screw length [mm]

Reference

560IPL4

560IPLPZ4

595IPL2

Screw diameter [mm]

4.5-5

4.5

8-10

Plug length [mm]

Screw insertion depth [mm]

30-50

40-80

Recess type

TX40

SW13

Head diameter [mm]

Material

Nylon

Screw length [mm]

≥30

≥40

Packaging units

Packaging type.

Blister

Applications

Lighting
Motion sensor/detector
Letterbox
Clothes hook
Signs

Further specifications

Key features:

Direct fastening into external thermal insulation composite systems (ETICS) without thermal bridges
Direct fastening into insulation material with no thermal bridge

Drills reliably through hard ETICS plaster (≤ 7 mm)
Drill both screw and plug without changing bits, saving time and money
Conforms to the technical requirements for thermal installations for buildings 1027/2007 (RITE)

Base materials

Suitable materials