Injection mortar ResiFIX EYSF

ResiFIX - For everyone the appropriate system
Product image of cartridge ResiFIX EY 300 SF
Product overview

The injection mortar ResiFIX EYSF is ETA- approved for non-cracked concrete (Option 7) and masonry and guarantees very high loads due to its high chemical resistance. That way it is perfectly suitable for heavy-duty applications and enables an installation free of expansion forces of e.g. anchor rods, anchor studs, square pipes, etc. also in many other base materials like hollow bricks, solid bricks and concrete.

Show more
Download documents
View videos
List of references
Filters
Content [ml]
280
410
Close
Reference
d
J
300EYSF
410EYSF
300EXSF
Content [ml]
d
J
280
410
280
Material
d
J
Epoxyacrylate
Epoxyacrylate
Epoxyacrylate
Packaging units
d
J
1
1
1
Packaging type.
d
J
Cartridge
Cartridge
Cartridge
A
t
3 / 3 references
Applications
  • Steel constructions
  • Consoles
  • Machines
  • Guard rails
  • Canopies
  • Distance mountings
  • Doors
  • Wood constructions
  • Facade substructures
Further specifications

Key features:

  • ETA assessment option 7 expects at least 50 years of working life in non-cracked concrete
  • ETA-Approval for masonry
  • Usable in waterlogged drill holes
Base materials
eta
Suitable materials with approvals
Concrete
Concrete
Solid brick
Solid brick
Solid sand-lime brick
Solid sand-lime brick
Lightweight solid concrete block
Lightweight solid concrete block
Hollow brick
Hollow brick
Hollow sand-lime block
Hollow sand-lime block
Lightweight hollow concrete block
Lightweight hollow concrete block
Other suitable materials
Natural stone
Natural stone
How to install

Mounting in concrete and solid brick

Drilling concrete
Dusting with blow out pump
Remove dust with a cleaning brush
Discard the first 10 cm.
Inject the appropriate amount of injection mortar (min. 2/3 of the drill hole)
Push in the anchor rod while turning
Respect the curing time of the injection system
Attachment can be mounted

Mounting in hollow brick

Create borehole
Clean the drill hole (4x blowing out, 4x brushing)
Clean the drill hole (4x blowing out, 4x brushing)
Insert a plastic sleeve
Discard the first 10 cm.
Inject the appropriate amount of mortar (fill the sleeve completely)
Push in the anchor rod while turning
Respect the curing time of the injection system
Attachment can be mounted

Do you have any questions about this product?

Request more info