Fixings and innovative solutions for pros at CELO
Blister insulation plug IPL 60 with screw 4,5x40 (PZ2)
- 1 x Velox® Chipboard Screw.Pan Head,Pozi Ref.Vloxb 4,5X40 Zinc Plated+Wax 500 Pcs
- 1 x Insulation plug IPL 60 (large packaging)
With the insulation plug IPL 60 in the handy blister direct fastening into external insulation material is possible - without thermal bridge. It is therefore a perfect solution for fixing in thermal insulation composite systems, hard-foam boards, polystyrene boards and many other substrates. The IPL consists of ageing- and weather-resistant nylon, is temperature-resistant from -40 to +80 °C and, thanks to its sharp cutting tip, drills reliably through hard ETICS plaster (up to 7 mm) - without pre-drilling.
The IPL 60 with a head Ø 25 mm is ideal for light fixings such as small lamps, motion detectors and edge trim strips, which are fixed to the anchor with a chipboard screw Ø 4.5- 5.0 mm. Make the installation of the IPL 60 easier with the practical duo bit: no bit change is necessary during installation and the duo bit is available in three versions (TX20/TX40, TX25/TX40 and PZ2/TX40). This saves time and money.
The practical blister contains 4 plugs IPL 60 incl. 4 chipboard screws Ø 4,5x40 (PZ2) for your individual projects.
- Lighting
- Motion detector
- Letterbox
- Signs
- Clothes hook
Key features:
- Special plug for external insulation composite systems
- Direct fastening into the insulation material - no thermal bridge
- No predrilling necessary due to sharp cutting tip; also drills reliably through hard ETICS plaster (≤ 7 mm)
- Made of ageing and weather resistant nylon
- Duo-Bit for IPL 60: One bit for plug and screw; saves installation time and money because no bit change is necessary.
- Ideal also for metal profiles and strips
- Temperature resistant from -40°C to +80°C
- Complies with the Regulation of Thermal Installations of Buildings 1027/2007 (RITE)
Base materials:
- ETICS (External Thermal Insulation Composite System)
- Polystyrene board
- Hard foam board
- Wood fibre insulation board (pre-drilling: 8mm for IPL60, 13mm for IPL95)
- Heraklith board
Do you have any questions about this product?
Request more info