Fixings and innovative solutions for pros at CELO
Blister insulation plug IPL 60
With the insulation plug IPL 60 in the handy blister direct fastening into external insulation material is possible - without thermal bridge. It is therefore a perfect solution for fixing in thermal insulation composite systems, hard-foam boards, polystyrene boards and many other substrates. The IPL consists of ageing- and weather-resistant nylon, is temperature-resistant from -40 to +80 °C and, thanks to its sharp cutting tip, drills reliably through hard ETICS plaster (up to 7 mm) - without pre-drilling.
The IPL 60 with a head Ø 25 mm is ideal for light fixings such as small lamps, motion detectors and edge trim strips, which are fixed to the anchor with a chipboard screw Ø 4.5- 5.0 mm. Make the installation of the IPL 60 easier with the practical duo bit: no bit change is necessary during installation and the duo bit is available in three versions (TX20/TX40, TX25/TX40 and PZ2/TX40). This saves time and money.
The practical blister contains 4 plugs IPL 60 for your individual projects.
- Lighting
- Motion detector
- Letterbox
- Signs
- Clothes hook
Key features:
- Special plug for external insulation composite systems
- Direct fastening into the insulation material - no thermal bridge
- No predrilling necessary due to sharp cutting tip; also drills reliably through hard ETICS plaster (≤ 7 mm)
- Made of ageing and weather resistant nylon
- Duo-Bit for IPL 60: One bit for plug and screw; saves installation time and money because no bit change is necessary.
- Ideal also for metal profiles and strips
- Temperature resistant from -40°C to +80°C
- Complies with the Regulation of Thermal Installations of Buildings 1027/2007 (RITE)
Base materials:
- ETICS (External Thermal Insulation Composite System)
- Polystyrene board
- Hard foam board
- Wood fibre insulation board (pre-drilling: 8mm for IPL60, 13mm for IPL95)
- Heraklith board
Do you have any questions about this product?
Request more info