Drop-in anchor SA plus with collar

The classic drop-in anchor, SA plus with collar, is suitable for various applications in ceilings and mainstream construction. Inline with the European Technical Assessment (ETA) the SA plus is an excellent all-round anchor, that enables secure installation close to the edges.

The perfect configuration of the cone and the sleeve ensures simple hammering-in at high load values. The anchor collar prevents slippage into the drill hole and the rounded sleeve simplifies the mounting. Good labeling on the anchor of the type and diameter, will help to ensure the correct ones are used on the project.

For installation a setting tool is needed: Use the ESW or ESW pro with hand protection.

All our sizing references M10 or smaller are certified with an European Technical Assessment (ETA) for both non-cracked concrete and cracked concrete, where as all sizing references M12 and above are certified for non-cracked concrete only. Refer to the table below to choose the right one for your application.

The short anchors, SAK plus 8-25 and SAK plus 10-25, with a length of 25 mm are perfectly suitable for precast, prestressed hollow core slabs.