Blister Insulation screw IPS 80 white + PH, A2

Quick, flexible direct fastening in ETICS - no thermal bridge!
Product image of blister insulation screw IPS
Product image of insulation screw IPS 80 signal white
EN - Technical drawing of insulation screw IPS 80
A Back to combination list
Reference:
5180IPSPH4
Material :
Nylon
Recess type :
TX25
Colour :
RAL 9003 - White
Plug length [mm] Ld:
80
Screw diameter [mm] ds:
3.5
Clearance hole [mm] df:
8-10
Thickness of fixture [mm] tfix:
10
Screw length [mm] Ls:
13
Head diameter [mm] dh:
16
Insertion depth [mm] Is:
10
Packaging units:
4
Packaging type.:
Blister
GTIN:
4250438918408
Download documents
View videos
Reference Description
5180IPSPH4
This reference includes 4 kits composed by
  • 1 x Pan-Head screw 3,5x13, A2, PH
  • 1 x Pan-Head screw 3,5x16, A2, PH
  • 1 x Insulation screw IPS 80 Signal white (RAL 9003)

Insulation screw IPS 80 signal white is perfectly suitable for direct fastening into insulation materials without thermal bridges of wall connection profiles, metal sheets, base protection profiles, cornice covers, motion detectors, lamps, signs, etc. The screw is made out of glass fibre-reinforced nylon, that means: aging, weather and UV-resistant. The IPS has a stylish flat head with EPDM-sealing for optimal sealing and adaption to the ground. With the TX-Drive (TX25) you get a fast and easy installation. The head hole allows light duty fixings in combination with a screw 3,5 mm. A distinctive thread ensures good hold in insulation boards, furthermore the IPS fits through a 8mm hole. No pre-drilling in plaster due to sharp drilling rip, therefore you get an extremely fast mounting. Because of the length of 80mm the IPS is suitable for nearly all insulated facades (from 80mm) out of polystyrene boards etc.

It´s packed in a handy blister.

Every blister includes 4 pieces of the IPS 80 in white color, 4 PH screws of 3,5x13mm and 4 PH screws of 3,5x1mm in stainless steel.

Applications
  • Wall connection profiles
  • Metal sheets
  • Base protection profiles
  • Cornice covers
  • Motion detector
  • Lighting
  • Signs
Further specifications

Key features:

  • Special screw for direct fastening into external thermal insulation composite systems (ETICS) - extremely fast and without thermal bridges!
  • For fastening of wall connection profiles, metal sheets, base protection profiles, cornice covers, motion detectors, lamps, signs, etc. into the insulation material
  • No pre-drilling in plaster (≤ 7 mm) due to sharp drilling tip
  • Made with fiberglass reinforced nylon, incorporates EPDM rubber weather, aging and UV resistant
  • Suitable for clearance holes ≥ Ø 8 mm (common for wall profiles)
  • Suitable for light duty fixings in combination with a screw Ø 3,5 mm
  • Stylish flat head in different colors

Base materials:

  • ETICS (External Thermal Insulation Composite System)
  • Styrofoam board
  • Hard foam board
  • Polystyrene board
  • Wood fibre board
Other related products

Do you have any questions about this product?

Request more info