Quick-fix anchor BAZ 8-72/10 HD, hot-dip galvanized, ETA Option 1

Maximum security for each project
Product image of quick-fix anchor BAZ HD for cracked and non-cracked concrete
Packaging photo of box quick-fix anchor BAZ back side
Packaging photo of box quick-fix anchor BAZ label side
Packaging photo of box quick-fix anchor BAZ front side
Mounting image BAZ 1
Mounting image BAZ 2
Mounting image BAZ 3
Mounting image BAZ 4
Application image of quick-fix anchor BAZ: Outdoor application on the metal beam roof of a cow barn
Application image of quick-fix anchor BAZ: Metal railing on a terrace
EN - Technical drawing of quick-fix anchor BA
A Back to combination list
Material :
Thread th:
Coating :
hot-dip galvanized
Drill hole diameter [mm] d0:
Drill hole depth [mm] h1:
Thickness of fixture [mm] tfix:
Eff. Anchorage depth [mm] hef:
Anchor length [mm] La:
Packaging units:
Packaging type.:
Reference Description
The quick-fix anchor BAZ 8-72/10 HD is excellently suited for a variety of fixings in cracked and non-cracked concrete, as confirmed by the ETA rating option 1 for cracked concrete - but can also be used for dense natural stone (up to M8). Due to its long thread, the BAZ quick-fix anchor ensures greater flexibility in application, especially for distance installations. Due to its elaborate expansion clip geometry, it quickly and safely anchors itself to the base material and achieves high load values even with small edge and axial distances. The perfect adjustment between the cone and the expansion sleeve ensures reliable expansion behaviour and high load values. Particularly in the case of push-through installation through wood, the rounding of the expansion cone simplifies the setting of the fireproof anchor (according to fire resistance class R120). The BAZ has a special impact protection on the head to protect the thread when hammering in. Thus the pre-assembled nut can always be unscrewed without any problems. Thanks to cold forming of the bolt and the thread, the BAZ reaches high hardness and precision and is approved as an anchor subjected to seismic loading (category C1). According to the VdS guideline, it may also be used for fixing pipes for fire extinguishing systems to concrete ceilings. The hot-dip-galvanized quick-fix anchor should be applied in dry indoor areas (according to ETA), but is technically also suitable for outdoor use.
  • Attaching steel structures
  • Railings (Outdoor: use stainless steel A4 or HCR)
  • Elevators
  • Machinery pipe supports
  • Cable trays
  • Guard rails
  • Facade substructures
Further specifications

Key features:

  • Distinctive knurls ensure a good grip and quick tightening of the anchor
  • The bolt and thread is cold-forged, giving the BAZ high precision and making it very strong
  • Punched bolt head prevents thread destruction while hammering.
  • A rounding of the expansion cone eases the anchor`s insertion into the hole especially when installed through wood
  • The perfect adjustment between cone and clip ensures reliable expansion and consistent high pull-out loads
  • ETA approved for non-cracked and cracked concrete (option 1)
  • Fire resistance certificate R120
  • Usable under seismic action
Base materials
Suitable materials
Dense natural stone
Dense natural stone
How to install
Step 1
Step 2
Step 3
Step 4

Do you have any questions about this product?

Request more info